Product Description:

The 2AD180D-B35RB3-BS03-A2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat and grouped within the 2AD 3-Phase Induction Motors series. It supplies rotational power for conveyors, extruders, and other motion axes in automated cells where constant torque is required. The motor couples with standard drive amplifiers so that speed and direction can be commanded directly from a PLC, making it suitable for coordinated industrial motion in demanding production equipment.

This model uses the 180 frame size with the D length code, which indicates the active iron stack and gives the motor higher continuous output than shorter designs. Standard bearings support the rotor and are selected for the radial and axial loads typical in high-duty cycles over long operating periods. Cooling air is forced through the housing by a radial blower, allowing rated operation even when the machine is installed inside an enclosed cabinet. Mechanical integration is simplified by flange and foot mounting, so the housing can be bolted to a base plate or directly to a gear reducer. Power conductors enter a terminal box fixed on the right side when the shaft faces the observer, and cables exit toward Side B to stay clear of coupling hardware.

For machines that rely on drive-controlled holding torque, the motor is supplied without a holding brake, so holding force must be provided by the inverter or an external clamp. The rotor energy is transferred through a smooth shaft without a seal, and there is no secondary shaft end on the opposite side, which simplifies alignment with couplings while reducing maintenance points. Dynamic accuracy is enhanced by the integrated high-resolution motor feedback unit that relays absolute rotor position to the control loop during repetitive motion. Compliance with vibration grade R limits transmitted oscillations to the frame, and winding code BS matches the stator impedance to standard 400 V inverters.