Product Description:

The 2AD180D-B35RB1-BS06-B2V1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase drive element, it converts electrical power into rotational motion that can be coupled to pumps, conveyors, or positioning axes throughout automated manufacturing cells. The motor’s design supports closed-loop drive controllers common in the company’s automation platforms, delivering continuous torque where variable-speed operation and high duty cycles are required.

Mechanical construction and electrical interfaces are tailored for installation flexibility. The frame follows the 180 size code, and the housing length corresponds to code D, giving adequate stator volume without excessive mass. A heavy-duty bearing set carries radial and axial loads produced by belt drives or gearboxes. Cooling air is forced through the winding stack by an axial blower, maintaining temperature during continuous service. Position data is returned to the drive via digital servo feedback, so speed regulation is precise over the working range. The stator windings are identified by code BS, and power enters through a terminal box mounted on the right side when the user faces the shaft.

Site-specific mounting is simplified because the housing is prepared for flange and foot mounting, letting designers bolt the motor to machine bases or gear reducers without adapters. The power leads route to side B, keeping cables clear of ancillary equipment, and the box orientation places them on the right for easy access in standard drivetrains. The rotor is balanced with the entire key, and there is no shaft seal, so coupling friction is minimized. Dynamic retention hardware is omitted; the unit is supplied without a holding brake, and vibration behavior is qualified to grade R to satisfy general-purpose industrial limits.