Product Description:

The 2AD180D-B35RA1-BS03-A2V2 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated factory cells, this motor supplies constant torque to material-handling axes, packaging spindles, or conveying lines where continuous duty and precise speed regulation are required. Its design supports industrial applications that need stable operation over long run times while remaining compatible with inverter-driven motion systems.

Dissipation of winding heat is handled by an axial blower, allowing the frame to remain within thermal limits during extended runs. Machine builders can secure the housing by flange and foot mounting, which simplifies alignment on either vertical or horizontal bases. Power conductors exit toward Side A and enter a sealed terminal box on the right-hand side when the observer faces the drive shaft, leaving service space clear on the opposite face. Internally, the rotor turns on heavy-duty bearings sized for the 180 mm frame code, and the D-length stack increases magnetic volume for higher continuous output. Winding code BS indicates the copper section and insulation pattern matched to standard 400 V inverters, while Side B is supplied without a shaft extension to avoid unnecessary rotating mass in belt-free installations.

The motor is delivered without a holding brake, so braking torque must be supplied by the drive or by external mechanics during power-off conditions. Position data are returned by the integrated high-resolution motor feedback sensor, enabling tight velocity loops even at low rpm and improving response during changing loads. A smooth shaft without a seal minimizes friction losses where an external labyrinth or coupling hub already provides separation from contaminants. Dynamic behavior complies with vibration grade S, which helps reduce structural vibration in machine assemblies that are sensitive to movement at the motor interface.