Product Description:

The 2AD180D-B35OB1-BS07-D2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. Designed for integration into machining centers, presses, and automated transfer lines, the unit converts electrical energy into continuous torque and speed under closed-loop control from an external drive. Its three-phase architecture and cage rotor make it suitable for high duty cycles that are common in industrial automation. This motor is intended for applications that require steady output during long operating periods and frequent speed changes.

Cooling is provided by an axial blower, forcing air along the housing to remove losses while keeping winding temperatures within limits. The motor belongs to size code 180, which provides a stator frame diameter that balances thermal capacity with installation footprint. Length code D extends the active iron stack, so higher power can be produced without enlarging the frame. Mechanical attachment is handled through flange and foot mounting, allowing either surface or base interfaces depending on machine layout. Winding code BS indicates the conductor cross section and turns per phase, matching the electrical characteristics expected by compatible drives.

Power is delivered through a terminal box that sits on the top of the stator, and the cables exit toward side B, simplifying routing in cabinets that run parallel to the motor’s non-drive end. Positional data returns to the controller via digital feedback with a multi-turn absolute encoder, enabling precise vector control without additional transducers. The shaft includes a seal and is balanced with the full key, while the opposite side is supplied without a shaft end to avoid unnecessary overhang loads. Operation proceeds without a holding brake, so standstill retention depends on drive torque or external machine hardware. Standard bearings accommodate the vibration grade R used for this frame.