Product Description:

The 2AD180D-B35OB1-BS07-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat and supplied within the 2AD 3-Phase Induction Motors series. It converts electrical power into rotational motion for automated machinery such as packaging lines, gantry axes, and material-handling stations in industrial plants. In these applications, the motor is intended for dependable continuous operation where accurate speed regulation and stable torque are required during repeated production cycles. Its induction-motor design also suits equipment that needs robust rotary output without the maintenance demands associated with commutated machines.

This model is delivered without a holding brake, so any static load must be restrained by the drive or by an external clamp when power is removed. Cooling air is moved through the frame by an integrated axial blower, allowing continuous operation at rated load without external ducting. Position and speed data are returned through digital feedback with a multi-turn absolute encoder, enabling precise closed-loop control over the full travel range and immediate position availability after startup. This feedback arrangement supports coordinated motion in systems that require retained position information after power cycling. Installation flexibility is provided through flange and foot mounting provisions that share the same housing, and power conductors terminate inside a cast aluminum terminal box that accepts standard industrial cable glands.

The motor uses frame size 180, which provides a larger stator window for higher torque density while keeping operation within vibration grade R. The power leads exit the housing on side B, and the terminal box is mounted on top of the stator so wiring can be routed from above in compact cabinets. The shaft is balanced with the full key fitted, and the design omits a shaft seal to reduce drag, while the opposite face is supplied without a second shaft end for direct coupling to gearboxes. A hardened steel shaft helps maintain mechanical stability under repeated starts, reversals, and load changes. Standard bearings support the rotor and absorb axial forces generated during acceleration. The winding uses the BS winding code, and the D motor length provides an extended core with additional copper for greater continuous torque output.