Product Description:

The 2AD180D-B35OB1-BS03-D2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat and aligned with the 2AD 3-Phase Induction Motors series. Designed for integration into drive packages and machine-tool spindles, it converts electrical power into controlled rotary motion for positioning, conveying, or cutting tasks inside automated cells. The model follows the series convention with size code 180 and length code D, which set its frame dimensions and active stack depth for mid-range continuous power output.

Cooling is handled by an axial blower mounted on the housing, so forced airflow keeps the stator temperature within limits when the motor runs at low shaft speeds. Lubricated heavy-duty bearings support radial and axial loads and extend service intervals in continuous duty. The flange and foot mounting arrangement lets the motor be fixed to end plates or base rails. Dynamic performance is classified under vibration grade R, showing compliance with runout tolerances for smoother tool paths. Electrical characteristics follow winding code BS, which indicates the resistance, inductance, and nominal voltage used with a compatible inverter.

The driven shaft exits on side A as a balanced shaft with entire key and shaft seal, which helps maintain coupling balance and limit oil ingress, while the B side remains closed because the unit is supplied without a shaft end. Braking torque is managed externally; the motor ships without a holding brake, making it suitable for applications where motion is clamped by the machine mechanics or the drive. Rotor position data is provided by the integrated high-resolution motor feedback sensor, allowing fine speed loops in digital drive controllers. Power conductors enter through a top-mounted terminal box that faces side B, a layout that simplifies cable routing inside cabinets and respects the clearances required by the frame size.