Product Description:

The 2AD180D-B35OB1-BS03-A2N1 is an AC induction motor supplied by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As a three-phase machine, it transforms electrical energy from the drive into rotary motion for conveyors, pumps, or general machine axes in automated lines. The part number indicates a frame size of 180 with length code D, placing the motor in a larger configuration suited to higher continuous output in industrial automation.

An axial blower cooling arrangement pushes air along the stator to remove heat, so the motor can stay within temperature limits without external ducting. For installation flexibility, the housing supports flange and foot mounting, allowing either face or base attachment to the machine frame. Position data is supplied through high-resolution motor feedback, letting the drive close velocity and torque loops accurately. The rotor ends in a smooth shaft without a shaft seal, minimizing runout for direct coupling where sealing is handled by the connected load. Incoming power is routed through a terminal box, which simplifies cable gland selection and provides access for three-phase leads and protective earth.

The motor is supplied without a holding brake, so the axis relies on drive torque or external clamping when power is removed. The motor size code 180 with length code D gives the motor iron volume suited to continuous torque and inertia for medium-weight loads. Dynamic behavior is further limited by vibration grade R, which indicates a balance quality suited to attached gear sets at rated speed. Wiring leaves the housing through a power connection on the top toward side B, keeping conduits clear of floor space and aligning with cabinets on the non-drive end. Standard bearings and winding code BS complete the motor for general-purpose duty within the series.