Product Description:

The 2AD180D-B35OB1-AS06-B2N1 is an asynchronous drive unit manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It supplies mechanical power for gantries, printing lines, and general production equipment that rely on regulated speed control. The motor connects to an inverter that modulates its stator frequency, allowing a control system to synchronize multiple axes while maintaining the high starting torque typical of cage-rotor designs used in industrial automation. This arrangement suits applications that need stable speed regulation across changing process loads and repeated duty cycles.

The model is cooled by an axial blower mounted at the non-drive end, directing air along the housing to keep winding temperature within permissible limits during rated load. Position and speed are returned to the controller through digital servo feedback, so closed-loop current regulation can be performed without external sensors. Its frame size is 180 with length code D, which provides a deeper stator stack for increased continuous torque. Mechanical installation uses flange and foot mounting points drilled into the casing. Power conductors terminate in a sealed terminal box whose outlet faces side B, and the box is mounted on top of the frame for straightforward cable entry.

The rotor assembly is supplied without a shaft seal and balanced with the full key, which reduces windage losses and maintains ISO balance quality when a keyed coupling is used. The motor has no shaft end on side B, so power is transmitted only from the driven end. Operating smoothness is classified under vibration grade R, and standard bearings support the radial and axial forces expected in belt or gear drives. The machine is delivered without a holding brake, so load retention must be provided by the drive or by mechanical locks. Electromagnetic parameters follow winding code AS, which matches standard 2AD inverter settings.