Product Description:

The 2AD180D-B35OA2-BS03-A2V2 is an AC induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As a rotational prime mover, this unit converts three-phase electrical power into continuous mechanical torque for conveyor sections, tooling spindles, and other automated axes that demand constant-speed performance under variable load. Built-in high-resolution motor feedback relays fine incremental data to the inverter controller, supporting accurate speed regulation and closed-loop operation.

Thermal management is handled by an integrated axial blower that draws air along the stator housing to keep copper and insulation temperatures within their intended limits. Installation flexibility is provided through flange and foot mounting, allowing the frame to bolt either to a baseplate or to a machine wall without alignment adapters. The three power leads enter a terminal box situated on the top of the housing, and that enclosure is rotated so the conduit entry faces side A. This orientation simplifies cable routing when the motor sits close to a bulkhead. Motor length code D provides the active iron stack needed for the torque class, while size code 180 fixes the stator diameter for compatibility with standard IEC couplings.

Mechanical longevity is supported by heavy-duty bearings that withstand radial belt forces and limit shaft runout during high-speed service. The motor is supplied without a holding brake, so external clamping or drive torque must hold stationary loads. A smooth shaft without a seal reduces friction losses in applications where the surrounding enclosure already provides IP protection, and it also mates readily with shrink disks or keyed hubs. Vibration grade S keeps running imbalance below limits for sensitive process equipment, and winding code BS matches the impedance profile expected by Bosch Rexroth PMA and DDS drives.