Product Description:

The 2AD180D-B35OA2-B506-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated machinery, it acts as the primary rotary drive element, converting electrical power into continuous mechanical torque for conveyors, transfer lines, and material-handling axes that require long duty cycles and minimal maintenance. It is commonly used with an inverter so motor speed can be matched to process demand during extended production runs.

This model is fitted with standard bearings to support the rotor under radial and axial loads encountered during sustained operation. Heat is removed by an axial blower mounted on the housing, and the blower draws air along the stator stack to keep winding temperature within its thermal limit. Installation flexibility is provided by flange and foot mounting, allowing either face mounting to gearboxes or placement on a base plate. The power leads exit on side A of the frame, and the connection point is on the top inside a sealed terminal box that helps keep wiring organized. There is no holding brake, so any static load must be restrained by the drive or by external locking devices. The absence of a shaft seal reduces frictional drag, and the terminal-box layout keeps control and power conductors separated for clear cable routing.

Closed-loop control accuracy is handled by the integrated digital servo feedback transducer, which returns precise speed and position data to the inverter. The D length code indicates an extended active core, and the frame size of 180 suits medium-torque machinery with a larger motor envelope. Dynamic behavior is further characterized by vibration grade R, which keeps running vibration within levels suitable for bearings and couplings. The shaft on the drive end is balanced with the full key fitted, while the non-drive side is supplied without a shaft end, which simplifies use in assemblies that require only one mechanical interface.