Product Description:

The 2AD180D-B35OA1-BS37-D2V1 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It functions as a rotating power source in automated machinery, turning three-phase electrical energy into continuous mechanical torque for spindles, presses, and conveyor sections. Integrated stopping and position-tracking features let a connected drive controller hold the shaft still during power-off intervals and restart production without manual alignment. This supports high-cycle machining, packaging, and material-handling cells that require consistent speed control.

Thermal management is handled by an axial blower that pushes cooling air along the stator to keep winding temperature within safe limits during prolonged duty. Emergency holding torque comes from an electrically released heavy-duty brake that locks the rotor whenever supply power is removed and releases the brake when excitation is restored. Closed-loop accuracy is maintained through digital feedback with a multi-turn absolute encoder, so homing cycles are unnecessary after shutdowns. Installation flexibility is provided by flange and foot mounting, enabling direct attachment to baseplates or machine frames. Power conductors enter a roof-mounted terminal box, which helps isolate live connections from coolant spray and metal chips.

The motor uses frame size 180, while length code D indicates an extended core that increases continuous torque without enlarging the mounting footprint. Heavy-duty bearings are matched to vibration grade R, which helps limit radial displacement under dynamic loads. The cable route is oriented on side A, which can shorten harness length in tight cabinets on suitable machine layouts. A shaft seal with a balanced key helps limit oil migration, and the lack of a shaft end on side B leaves room for auxiliary blowers or secondary encoders when an application needs added cooling or extra feedback channels.