Product Description:

The 2AD180D-B35OA1-BS07-D2N1 belongs to the 2AD 3-Phase Induction Motors series produced by Bosch Rexroth Indramat. As an AC induction motor, it converts three-phase electrical input into mechanical rotation for conveyors, spindles, and pump drives used in industrial machinery. Its design suits applications that need continuous operation, stable speed control, and a motor platform that can be integrated into automated equipment without unnecessary external cooling hardware.

This unit is cooled by an integrated axial blower that directs airflow along the stator to keep winding temperatures within the continuous-duty range. Position and speed are reported through digital feedback with a multiturn absolute encoder, giving the controller absolute rotary data over multiple turns for closed-loop regulation. Mechanical installation supports flange and foot mounting, so the motor can be attached by its face or base to suit the machine layout. Power conductors exit through the top of the frame and route to side A, which helps reduce sharp cable bends when the motor is mounted above cabinet entries. The output uses a balanced full-key shaft with a shaft seal, which helps transfer torque securely while limiting lubricant leakage and contaminant entry.

The main terminal interface sits inside a terminal box, providing enclosed connection points for the incoming leads. Frame size 180 sets the mounting dimensions and shaft height used by this motor housing. Operation falls under vibration grade R, which supports smooth running on coupled loads when the motor is installed correctly. The motor is supplied without a holding brake, so any static load retention must be provided by the drive or by an external device. The D length code indicates an extended active core for higher continuous torque, side B has no shaft end, and winding code BS sets the electrical and thermal behavior expected by the matched inverter.