Product Description:

The 2AD180D-B35OA1-BS07-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In automated machine tools, material-handling lines, and printing systems, it converts three-phase electrical power into rotary motion for regulated operation with a compatible drive controller. Its design uses the standard bearing arrangement for this motor type and comes without a holding brake, so any stationary load retention must be handled by the drive or by external machine hardware. This layout suits installations that need dependable continuous operation without adding a separate brake assembly to the motor body.

An internal axial blower forces air along the stator to remove heat, permitting continuous torque delivery without external cooling equipment. Closed-loop control is supported by a multi-turn absolute encoder, which returns both position and revolution count so shaft orientation remains available after power interruptions. The motor uses size code 180 and length code D, placing it in a large frame with an extended active stack for this series. The housing supports flange and foot mounting, so it can be secured to either a machine face or a base while keeping shaft alignment consistent during installation.

The power terminals are housed in a cast terminal box mounted at the top of the motor, and the conductors route toward Side A to simplify cable routing where enclosure space is limited. The output uses a smooth shaft with a shaft seal, which helps protect the bearing cavity from airborne particles and supports direct coupling arrangements. The motor uses vibration grade R, indicating balancing suitable for general industrial service. Winding code BS corresponds to the internal electrical layout and thermal components, so the connected drive must use matching motor data for proper operation.