Product Description:

The 2AD180D-B35LB1-BS06-B2N1 belongs to the 2AD 3-Phase Induction Motors series manufactured by Bosch Rexroth Indramat. In automated material-handling lines or machining centers, this frame size drives pumps, spindles, and conveyor stations where constant torque and closed-loop speed supervision are required. Its three-phase stator, squirrel-cage rotor, and integrated feedback channel allow the drive controller to adjust current in real time, keeping production axes synchronized with cycle commands and stable under changing load conditions.

Thermal management is provided by an axial blower that forces air over the housing to remove copper and iron losses before they accumulate. Because the unit is supplied without a holding brake, mechanical stoppers or drive torque must maintain position during idle periods. Rotor position is returned through digital servo feedback, giving the inverter fine resolution for velocity and vector-current regulation. The motor uses length code D and frame size 180, which help with gearbox selection and installation clearance planning. Standard-grade bearings support the shaft for general industrial duty and help minimize relubrication intervals.

Installation flexibility comes from flange and foot mounting, which allows either B35 composite mounting or dedicated foot placement on machine bases. The power entry uses a terminal box; leads route toward the non-drive face because the connection direction is to side B, and the box sits on the left when viewed toward the output shaft. Dynamic balance is achieved by machining the taper key with the rotor, yet the design omits a shaft seal, reducing friction at high speed. Side B has no auxiliary shaft end, which simplifies coupling layouts that demand only a single output. Vibration exposure is limited to grade R, and the winding code BS corresponds to impedance values matched to series inverters.