Product Description:

The 2AD180D-B35LB1-BS03-B2N1 is a motor built by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. Designed for integration into machine tools, printing presses, and packaging lines, the unit converts electrical power into rotational motion that can be delivered directly to gear stages or belt drives. Its construction follows the 2AD platform, so it works with compatible drive controllers in larger automation systems. This arrangement supports precise speed control in applications that require stable continuous operation.

The motor relies on an axial blower to force cooling air across the stator and end windings, which limits temperature rise during continuous duty. Position and speed are tracked by high-resolution motor feedback, enabling tight drive regulation over the full speed range. Mechanical attachment uses flange and foot mounting, so the housing can be secured on a base or against a machine wall, while incoming power terminates inside a cast-aluminum terminal box that provides strain relief and shields the conductors from dust. With frame size 180, the laminated core provides a substantial torque envelope, and balancing to vibration grade R helps reduce dynamic forces transmitted to the machine frame.

The motor has length code D, which indicates an extended stator stack that raises continuous output without changing the mounting face. Winding code BS matches this geometry with conductors sized for the drive's voltage and current range. Cabling enters on side B, and the terminal box sits on the left when the shaft faces the user, which can simplify downward cable runs. The rotor is balanced with the key installed, the shaft has no seal, and there is no shaft extension on side B. This layout suits enclosed machine spaces where separate guarding already limits fluid exposure around the shaft area. The motor is supplied without a holding brake, so static holding must be provided by external equipment, and standard bearings support normal radial and axial loads.