Product Description:

The 2AD180D-B35LA1-AS03-B2V1 is an AC induction motor built by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. Designed for continuous-duty automation axes, the unit converts three-phase electrical input into controlled shaft torque for machine tools, printing lines, and packaging cells. The designation indicates frame size 180 and length D, while the B35 mounting pattern combines flange and foot surfaces for installation on baseplates or gearboxes. Operating with asynchronous rotor technology, the motor supports sensor-based speed regulation through the integrated feedback device and pairs with modular inverter platforms.

Cooling is provided by an axial blower mounted on the stator end, which forces airflow along the housing to keep winding temperatures within operating limits during high continuous torque output. The frame size code of 180 indicates a stator outside diameter that supports higher magnetic flux and heavier loads than smaller 2AD models. The housing uses flange and foot mounting, allowing either face or base installation without extra brackets. This model is supplied without a holding brake, so the axis must be secured during power-off by external locking hardware or drive torque. Closed-loop control is supported by high-resolution motor feedback, which improves speed and position response.

The rotor runs on heavy-duty bearings selected for long service life under elevated radial forces. Vibration behavior is graded as R, which helps limit displacement that could transfer to connected machinery during operation. Power conductors enter through a sealed terminal box positioned to the operator’s left when facing the shaft, and the conduit orientation is on side A for straightforward cabinet wiring. The keyed shaft is balanced to the full key and is supplied without a shaft seal or a second shaft end, which reduces mechanical drag while supporting couplings that rely on standard key engagement.