Product Description:

The industrial drive labeled 2AD180C-B35RR3-BS03-D3V1 belongs to the 2AD 3-Phase Induction Motors series from Bosch Rexroth Indramat. As an induction motor, it transforms three-phase electrical energy into rotational motion for conveyors, packaging stations, and other automated axes that demand continuous torque without embedded electronics in the motor housing. Within a system, this motor pairs with an external inverter, allowing the drive package to be matched to required speed and load characteristics while keeping maintenance straightforward.

A radial blower is fitted to send cooling air across the stator and end windings, keeping thermal rise within limits during heavy cycles. Position data are supplied through high-resolution motor feedback, enabling tight velocity and torque loops in the connected drive controller. Machine builders can secure the housing through flange and foot mounting, so the same frame fits either base plates or end shields without adapters. Frame designation 180 indicates the approximate stator outside diameter, while the active core length is identified by C. These dimensions help determine shaft height, flange pattern, and available torque before installation.

The power conductors terminate in a terminal box and exit the enclosure on the operator's side; the connection faces to the right when looking toward the output shaft, simplifying cable trays that run along the machine base. Heavy-duty bearings support high radial forces from belt drives, and a shaft seal helps prevent lubricant loss when airborne oil mist is present. Vibration grade R keeps running oscillation within limits for precision assemblies. The rotor is delivered with a balanced key and a finished shaft end on the opposite side for auxiliary couplings. Because the unit is supplied without a holding brake, mechanical locking must be provided externally. Winding code BS identifies the copper layout and insulation scheme used with standard 400 V inverter supplies.