Product Description:

The 2AD180C-B35RR1-BS03-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This motor supplies rotary power for industrial automation tasks that call for continuous duty operation and closed-loop speed regulation. It fits into drive packages where electric cabinets control multiple axes and where feedback-ready induction machines are required to run pumps, printing cylinders, or material-handling rolls.

An internal axial blower forces air across the stator to keep winding temperature within permissible limits at full load. Position data is returned by a high-resolution motor feedback device, so the drive can issue precise vector-control commands. Mechanical integration is simplified because the housing supports flange and foot mounting, allowing either base or face installation without adapters. The frame follows size code 180, indicating the center height and bolt pattern used in standard IEC layouts, while electrical leads terminate inside a sealed terminal box that accepts rigid or flexible conduits. Standard bearings handle radial and axial forces common to belt transmissions. A C-length stack increases active iron for higher torque density. The rotor is keyed and dynamically balanced with the complete key in place to support smooth acceleration.

This motor is built to Vibration Grade R, keeping oscillation within limits for sensitive equipment, and it is supplied without a holding brake, so motion retention must be arranged externally when power is removed. Power enters from the operator's right-side power entry, matching drive cabinets that route cables along a common channel, and the winding follows the BS winding code, which aligns resistance and inductance with Rexroth inverters. Power exits only at the drive end; side B has no shaft extension, and there is no shaft seal, reducing drag in high-speed service.