Product Description:

The 2AD180C-B35RR1-BS01-D2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. In factory automation, this machine couples to gearboxes, pumps, or belt transmissions to supply regulated rotary motion under vector-controlled drives. When matched with an inverter, it provides continuous shaft power for conveyors, extruders, and printing cylinders while tolerating rapid duty cycles common in modern assembly lines. This type of motor is also well suited to applications that operate for long periods under changing load conditions.

Thermal management is handled by an integrated axial blower, which forces air along the stator housing so output torque can be maintained at rated current during extended duty. The motor uses frame size 180, placing it in a range suited to medium and high-power industrial drive tasks. Installation flexibility is provided by flange and foot mounting, allowing the same unit to be bolted to a machine base or directly to a gearbox interface. Internally, standard bearings support radial and axial loads from belt tension or coupling alignment errors while maintaining stable running behavior. Power conductors terminate inside a sealed terminal box, which simplifies cable entry and protects the connections from oil mist and dust. Because the motor is delivered without a holding brake, static load retention must be provided by the drive or by an external mechanical device.

The power connection is located on the right side, so wiring can exit toward a nearby control cabinet when the observer faces the drive shaft. The output is a keyed shaft with a shaft seal, which provides positive torque transfer while helping limit lubricant escape at the coupling point. This arrangement also helps keep the connection area orderly in compact machine layouts where nearby rotating parts leave little extra space. Electrical characteristics are tied to winding code BS, which corresponds to the copper fill and turns count selected for the voltage, current, and frequency used in standard 2AD drive packages.