Product Description:

The 2AD180C-B35RR1-BS01-B2N1 is produced by Bosch Rexroth Indramat for machinery builders who rely on the 2AD 3-Phase Induction Motors series to drive pumps, printing cylinders, and gantry axes. As an asynchronous unit, it transforms electrical power into rotational motion while providing the high starting torque expected in industrial automation. Its frame belongs to the 180 size class, and the device functions as an integrated drive component that is wired directly to a matching inverter for closed-loop speed control.

This model is classified as an AC Induction Motor, so it uses rotor slip for torque production and needs no permanent magnets or brushes. The motor uses Motor Size Code 180, which sets mounting hole spacing and shaft height, while Motor Length Code C indicates the active iron stack that supports continuous power capability. Forced ventilation is supplied by an integral Axial Blower, which pushes cooling air along the housing to remove heat from the stator windings during heavy-duty cycles. Installation flexibility is provided by Flange and foot mounting, allowing either face mounting to gearboxes or base mounting to machine beds. Electrical conductors enter through a top-right Terminal Box. The power feed is arranged to the right side when the viewer faces the shaft, simplifying cable runs in cabinets placed on that side of the motor. Standard bearings limit internal vibration and support radial loads transmitted by belts or couplings.

Dynamic balance quality is indicated by Vibration Grade R, keeping mechanical oscillations within limits for printing and precision tooling lines. The stator coils use Winding Code BS, matching the impedance and thermal class expected by compatible drives. The machine is supplied without a holding brake, so position retention during power loss must be provided by external clamping or drive torque. There is no shaft end on side B, and the drive shaft on side A is keyed, balanced with the complete key, and delivered without a shaft seal to minimize friction. Power cabling approaches from the right, and an internal terminal links ground to the housing.