2AD180C-B35RR1-BS01-A2N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911255694
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 2AD180C-B35RR1-BS01-A2N1 is an AC induction motor from the 2AD 3-Phase Induction Motors series. It features flange and foot mounting, a smooth shaft without a seal, and uses an axial blower for cooling. This model comes equipped with standard bearings and has a terminal box power connection positioned to the right.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 2AD180C-B35RR1-BS01-A2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. The unit serves as a prime mover in industrial automation, converting electrical energy into controlled rotary motion for conveyors, gantry axes, and machining spindles. It is built for continuous duty where reliable speed control and stable thermal behavior are required. When paired with a compatible drive controller, the motor can support regulated acceleration, steady running speed, and repeatable response under changing loads. This makes it suitable for applications that run for long shifts and require consistent output across repeated cycles.
The motor uses an axial blower to force air along the frame and remove heat generated by the stator during sustained operation. Mechanical integration is simplified by flange and foot mounting, allowing the housing to bolt either to a face plate or a base plate. Power conductors land in a sealed terminal box that protects the connections from dust and vibration. The motor has a size code of 180 and a length code of C, which correspond to the frame dimensions used for this housing. Standard bearings support the rotor, and the assembly is supplied without a holding brake, so static position must be maintained by the drive or an external locking device.
A smooth shaft without a seal provides the drive interface, so couplings must be aligned carefully and external contamination should be controlled by the machine design. Dynamic behavior conforms to vibration grade R, which helps limit motion transfer to connected equipment during normal operation. Cabling enters on the right when viewed from the shaft, matching layouts with right-side cable routing. Side B has no shaft end, which can simplify mounting against stationary plates. Winding code BS identifies the electrical characteristics expected by compatible Rexroth inverters and supports proper current matching during operation.
Frequently Asked Questions about 2AD180C-B35RR1-BS01-A2N1:
Q: What type of cooling system does the 2AD180C-B35RR1-BS01-A2N1 motor utilize?
A: The 2AD180C-B35RR1-BS01-A2N1 uses an axial blower for cooling to manage operating temperatures during use.
Q: What type of shaft does the 2AD180C-B35RR1-BS01-A2N1 motor have?
A: This model features a smooth shaft design without a shaft seal, suitable for applications requiring minimal shaft friction.
Q: How can the 2AD180C-B35RR1-BS01-A2N1 motor be mounted?
A: The mounting configuration for this motor includes both flange and foot mounting, providing flexible installation options.
Q: Where is the power connection located on the 2AD180C-B35RR1-BS01-A2N1 motor?
A: The power connection for this motor is positioned to the right, viewed from the shaft end, and uses a terminal box for secure connectivity.
Q: Does the 2AD180C-B35RR1-BS01-A2N1 motor include a holding brake?
A: This version is supplied without a holding brake, so it is not able to provide static holding torque when powered down.
