Product Description:

The 2AD180C-B35RB3-BS23-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. With a 180 frame and length code C, the unit provides three-phase torque for positioning, conveying, or spindle duties in automated machinery. Its design integrates motor feedback so compatible drive controllers can close velocity and position loops without external sensors.

The motor uses a radial blower for forced-air cooling, directing air across the stator fins to remove heat generated by copper and core losses so rated current can be maintained in enclosed cabinets. Inside the housing, heavy-duty bearings support axial and radial loads associated with belt tension or direct-drive couplings. An electrically released brake holds the shaft when power is removed and disengages automatically when the drive energizes the coil. Closed-loop accuracy is improved by the integrated high-resolution motor feedback device, which reports rotor position with fine granularity for smooth low-speed operation. To withstand production-floor vibration, the assembly meets vibration grade R, which helps keep mechanical resonance within acceptable limits.

Installation flexibility is provided by flange and foot mounting, allowing the housing to be bolted either to a base plate or to a gearhead face without additional brackets. Power leads exit through a connector plane oriented on side B, and the terminal chamber sits on the right side when viewed from the drive end, which can simplify cable routing in right-handed electrical enclosures. Mains conductors are landed inside a sealed terminal box that offers strain relief and space for EMC glands. The keyed shaft is equipped with a seal to help block lubricant leakage, while the opposite end is supplied without a shaft extension so the motor can mount flush against cooling fans or feedback devices. Winding code BS indicates the conductor gauge and impedance used with compatible drive inverters.