Product Description:

The 2AD180C-B35RB1-BS03/S019 is an AC induction motor produced by Bosch Rexroth Indramat and supplied within the 2AD 3-Phase Induction Motors series. Designed for continuous rotary motion tasks, the unit converts drive-inverter output into mechanical torque for conveyors, presses, and general machine axes. Its electromechanical construction, combined with external cooling and precision feedback, gives machine builders a ready-to-mount solution for high-duty industrial automation assemblies.

The motor is supplied without a holding brake, so any static load must be secured by the drive or an external locking element. Continuous temperature control is achieved by an axial blower fixed to the housing; forced airflow removes heat from the stator so the motor can produce rated torque even inside sealed cabinets. Position feedback arrives from the high-resolution motor feedback encoder, allowing the drive controller to close a precise speed loop and detect minute velocity deviations. Frame dimensions follow size code 180, while length code C indicates the active core depth; together these codes describe the physical envelope and thermal mass used to match machine inertia.

Installation flexibility is provided by flange and foot mounting, enabling either wall or base attachment without additional adapters. Power terminals are routed to side B, and the junction box sits on the right when the shaft is viewed from the front; this fixed orientation simplifies cable routing along a common machine edge and keeps the encoder leads clear of the mains conductors. The stator leads terminate inside a rugged terminal box, providing screw-clamp access for lugs sized for the machine’s supply conductors. Electromagnetic characteristics are set by winding code BS, which relates to the coil pitch and wire gauge selected for nominal voltage and frequency compatibility with 2AD drives.