Product Description:

The 2AD180C-B35RB1-BS03-A2N1 is an AC induction motor built by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. In automated machinery, this unit converts electrical energy into rotational motion for pumps, extruders, and material-handling axes that demand continuous torque and straightforward speed control. Its asynchronous rotor design allows slip-based torque production and simple scalar or vector inverter regulation across a broad frequency range. The housing is cast aluminum with integral fins that channel airflow from the external fan stage.

This model uses an axial blower to force cooling air along the stator, permitting rated output without thermal derating. Position data comes from high-resolution motor feedback, so the drive can maintain smooth speed even at low revolutions. Mechanical fixation follows flange and foot mounting, letting the frame bolt either to a base plate or directly to a gearbox face. The envelope matches motor size code 180, a dimension that balances torque capability against installation space. The motor uses standard bearings, providing the bearing arrangement used for general-duty operation. Line conductors terminate in a terminal box, which provides screw-clamp access for armored-cable entry.

The motor is supplied without a holding brake, so loads must be secured by the inverter or external clamps. A smooth shaft without a seal forms the output interface, reducing runout but requiring the connected machine to keep contaminants away. Internally, winding code BS identifies the conductor gauge and turns used for this C-length stack, matching the impedance expected by 2AD drives. Dynamic balance meets vibration grade R, allowing installation on bases that adhere to ISO limits for displacement. The power lead orientation is to Side B, with the terminal box on the right when looking toward the driven shaft, and the rear face carries no secondary shaft extension.