Product Description:

The 2AD180C-B35RB1-BS01 is an induction motor produced by Bosch Rexroth Indramat within the 2AD three-phase induction motors series. As an asynchronous drive element, it converts electrical energy into regulated torque for conveyors, packaging axes, and general machine tool spindles. The unit is supplied as a complete rotating assembly for use with matching frequency inverters and mechanical transmissions in automated equipment. Its asynchronous operating principle makes it suitable for applications that need robust speed control across changing loads. In such systems, the motor works with the inverter to adjust output smoothly during acceleration, running, and deceleration.

Cooling is provided by an integrated axial blower that forces air along the stator housing to maintain thermal limits during continuous duty. With a motor size code of 180, the frame provides a larger iron cross-section for higher magnetic flux. A motor length code of C indicates a medium stack length that balances torque output with overall mass. The product is an AC induction motor, so rotor currents are induced rather than carried through brushes. It is supplied without a holding brake, so any load that must remain fixed at standstill needs external retention.

The housing supports flange and foot mounting, allowing either end-plate or base installation without adapter plates. Electrical entry is routed to side B, and the termination point is on the right side when viewed from the front toward the shaft, which helps keep cable routing organized on aligned machine sections. Power conductors land inside a sealed terminal box that accepts standard lugs and gland fittings. This arrangement can simplify installation where several motors are mounted along the same machine frame and cable paths must remain consistent. The enclosure protects the stator connections and keeps the wiring interface grouped in one accessible location for machine integration.