Product Description:

The 2AD180C-B35RA2-BS03-B2V1 is an AC induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Serving as a drive element in automated cells, it converts three-phase electrical energy into steady rotary power for conveyors, gantries, and spindle groups. Its modular construction allows it to operate with compatible inverters and feedback devices for closed-loop speed regulation in industrial automation.

The motor uses axial blower cooling to force air along the stator and remove heat during prolonged duty cycles. It is equipped with heavy-duty bearings that tolerate the higher radial loads common in belt-driven arrangements. Installation is supported by flange and foot mounting, allowing either face or base attachment to machine frames. The frame designation of size 180 gives the motor a large stator diameter for higher torque capability, while the terminal box connection provides separated power terminals for field wiring. The connection hardware is positioned on the right when facing the shaft and routes toward Side A, which helps keep cable runs orderly in compact enclosures. This variant has motor length code C, comes without a holding brake, and has no shaft extension on Side B.

The electromagnetic design uses winding code BS, which matches the stator characteristics to compatible drive ratings. The motor uses vibration grade R, which helps reduce transmitted oscillation into nearby machine components during operation. Position and velocity are monitored through high-resolution feedback, supporting accurate speed control during rapid indexing and continuous running. Power enters through power entry on the right side, which helps keep the terminal box area less exposed to coolant spray when the motor is foot-mounted. The shaft is supplied without a shaft seal and is balanced with a complete key. Blower airflow follows the specified Side A direction.