Product Description:

The 2AD180C-B35RA2-BS03-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It provides continuous rotary power for conveyors, packaging machines, and other automated stations that need steady torque from a three-phase motor. Because the design does not use brushes or slip rings, it reduces maintenance and supports closed-loop inverter control in industrial automation environments. This operating concept also helps the motor maintain stable performance when loads change during normal production cycles.

This model is cooled by an integrated axial blower that pushes air through the frame to keep stator temperature within its allowable range during heavy duty cycles. The motor uses size code 180 and length code C, which correspond to the frame dimensions and active stack length used for this configuration. Installation is supported by flange and foot mounting, so the housing can be secured to a baseplate or a gearbox face. Electrical power enters through a top-mounted terminal box, which helps with conduit routing and protects the main leads. The shaft is supplied without a shaft seal and is balanced with the entire key installed to limit additional runout. Standard deep-groove bearings support the rotor, and no holding brake is included.

Rotor position is tracked by high-resolution motor feedback, allowing precise vector control at low speed. Power conductors exit toward side A, and the connection point is fixed on the right when the motor is viewed from the drive end. This arrangement supports predictable cable routing when the motor is installed in repeatable machine layouts. The assembly meets vibration grade R, which helps limit transmitted oscillations in precision machinery. For electrical identification, the stator uses winding code BS. The rear face has no shaft end, so auxiliary loads cannot be coupled on side B.