Product Description:

The 2AD180C-B35RA1-BS03-A2V2 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. This motor supplies rotary power to conveyors, presses, and other automated stations that need continuous torque from a mains-driven machine element. By combining the efficiency of an induction design with external forced-air cooling, the unit serves as a workhorse in production cells where constant speed and reliable torque delivery are required. Its overall layout is well suited to fixed industrial installations that run for long periods under steady process demand.

The rotor is supported by heavy-duty bearings that withstand radial and axial loads common in belt-driven or gear-driven assemblies. Air is pushed through an IP24-rated blower housing, which helps keep fingers and larger debris away from the fan while still admitting cooling air from the surrounding area. The forced airflow is provided by an integrated axial blower that directs air along the stator to reduce localized heat buildup during operation. The stator windings are enclosed behind a casing sealed to IP65, so dust and water jets cannot enter the active motor chamber. With size code 180, the frame balances torque density with manageable mass, while the C length supports the intended power range. The design omits a holding brake, so stopping and holding functions must be managed by the drive or by an external mechanical lock. A smooth shaft without a seal is provided on the drive side, and the rear face has no shaft extension.

The motor can be secured by flange and foot mounting, allowing alignment on a base plate or direct coupling to gearboxes. Power conductors enter through a right-hand terminal box that faces Side A when viewed toward the shaft, which helps keep cable routing orderly along the machine frame. Positional data for closed-loop control comes from a high-resolution motor feedback encoder mounted inside the drive-end shield. Dynamic loads are accommodated by vibration grade S, which helps limit displacement during high-speed operation and supports smooth running of connected mechanisms. The BS winding is matched to standard 400 V inverters.