Product Description:

The 2AD180C-B35OR2-BS03-B2V1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a squirrel-cage drive element, it converts three-phase electrical power from a frequency inverter into continuous shaft rotation for transfer lines, packaging stations, and metal-cutting spindles that require constant torque across a broad speed range. The unit forms the mechanical interface between the electronic drive and the working load in modern industrial automation cells. Its design is suited to inverter-controlled operation where stable output, repeatable speed behavior, and continuous industrial duty are important.

Heavy-duty bearings carry elevated radial forces from belt or gear loads. An Axial Blower forces cooling air through the housing, helping keep stator windings within their insulation limit during prolonged high-current operation. The motor is supplied without a holding brake, so residual torque does not impede free coasting when power is removed. Integrated High-resolution motor feedback provides fine position data to the inverter for accurate speed regulation and stable closed-loop response. Frame classification follows Motor Size Code 180, which corresponds to a large motor body suited to substantial mechanical loads.

The Flange and foot mounting arrangement allows either face coupling to a gearbox or base anchoring to a machine bed. The C length uses a moderate stack height that balances torque capability with overall package size. Power conductors terminate in a Terminal Box mounted on top of the housing, and the lead-out points to the right for straightforward cable routing inside enclosures. Dynamic balance is maintained to Vibration Grade R, which helps reduce oscillation at high speed. Electrical behavior follows Winding Code BS, while side B is supplied without a shaft end and the main shaft has no shaft seal but is balanced with a full key for coupling hubs or pulleys.