2AD180C-B35OR2-BS03-A2V2

Product Description:

The part number 2AD180C-B35OR2-BS03-A2V2 debuts as a servo motor from Bosch Rexroth’s famous 2AD 3‑Phase Induction Motors product line that excels in precision control motion. The unit comes with a 180 mm frame size establishes a robust enclosure that maintains alignment under fluctuating demands. Featuring an option of flange and foot mounting secures the module in varied orientations, which prevents misalignment during high‑speed operation. The rotor moment of inertia is 0.373 kg·m², which allows predictable acceleration and deceleration behavior during rapid positioning sequences.

Winding code as R2 signifies the specific coil design to optimize torque production for the motor’s intended duty cycle. Surface-cooled construction relies on the housing’s exterior fins, which dissipate heat without requiring an external fan. Absolute encoder feedback via EnDat delivers precise data positioning that refines feedback loop accuracy. A maximum speed of 3000 rpm accelerates the cycle throughput which shortens machining times. With a 9.6 kW rated power, the output matches moderate load application demands that maintain energy consumption and performance. Consuming 400 V rated voltage makes it well-suited with common 3‑phase supplies, which streamline electrical integration. Generating 61 Nm rated torque ensures sufficient force for indexing tasks to enhance repeatability.

A thermal lag coefficient of 70 minutes defines the motor’s time constant for winding temperature rise and fall, aiding in accurate thermal protection and duty‑cycle planning. IP65 protection class repels dust ingress and water jets, which increases the motor’s working life in critical environments. Thermal Class-F insulation withstands higher winding temperatures and prolongs device longevity. Permissible temperature operation from 0°C to +45°C accommodates common plant conditions which prevents thermal loss. Elevation limits up to 3,280 ft maintain full power output to support installations above sea level. The unit’s mass of approximately 310 kg must be considered when designing foundations and support frameworks to maintain rigidity under varied loads.