Product Description:

The 2AD180C-B35OR1-BS03/S019 is an AC induction motor manufactured by Bosch Rexroth Indramat and supplied under the 2AD 3-Phase Induction Motors series. As a rotating drive element in industrial automation, the unit converts three-phase electrical energy into mechanical shaft power for coordinated motion tasks. In closed-loop installations, it can be paired with a compatible controller so commanded speed changes are translated into stable shaft rotation during varying process loads. That operating role allows the motor to serve as a main drive source in equipment that must balance continuous duty with accurate speed regulation.

Thermal regulation is handled by an integrated axial blower that forces air through the motor ducts to maintain winding temperature. The motor uses frame size 180 and length code C, which establish its mechanical envelope and output range. Mounting points are provided for flange and foot mounting, letting the unit be secured on a base plate or directly to a gear housing. Power conductors are routed through a connection chamber positioned on the top of the housing, which supports straightforward vertical cable routing. The unit is supplied without a holding brake, so static load retention must be achieved through external means.

Electrical interfacing is completed inside a terminal box that is oriented to the right of the stator, allowing cable entry from the drive side of the machine frame. The stator coils use the BS winding code, which provides electrical characteristics matched to compatible series drive amplifiers. For precise speed and position control, the shaft couples to a high-resolution motor feedback device that sends fine-increment data to the controller. The feedback channel helps the control system correct slip-related speed variation and maintain smooth motion when the load changes. This arrangement supports coordinated motion where steady regulation and repeatable response are needed during acceleration, deceleration, and constant-speed operation.