Product Description:

The 2AD180C-B35OR1-BS03-D2V1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts electrical energy into rotational motion for pumps, presses, and material-handling axes that require sustained torque and low maintenance. When used in a drive package, the motor provides the mechanical output that a controller regulates for speed or torque during continuous-duty operation. This arrangement supports processes that must run for long periods with stable shaft performance. The induction motor design is suited to industrial applications that demand reliable rotation over repeated production cycles.

The rotor runs on heavy-duty bearings that support radial and axial forces from belts or couplings. The motor is supplied without a holding brake, so any required holding force must be provided by the drive or external mechanical equipment. Cooling is handled by an axial blower mounted on the housing, and the forced airflow helps keep stator temperature under control during continuous duty. A built-in encoder provides high-resolution motor feedback, allowing the inverter to maintain precise vector control and respond accurately to changing load conditions. The housing supports flange and foot mounting, so the unit can be attached to baseplates or machine walls. The motor has size code 180 and length code C, which place it in a large industrial frame.

In the connection area, a terminal box is mounted on top of the frame, and the leads exit to the right to support orderly cable routing along vertical panels. This layout keeps the main electrical connection in one area of the housing and leaves the non-drive end clear for surrounding machine parts. The drive end uses a shaft with an entire key and a shaft seal, which supports torque transmission while helping limit contaminant entry. The opposite side has no shaft end, making the motor suitable for single-ended transmission layouts. Running quality complies with vibration grade R, which helps reduce unwanted motion transferred to connected equipment. The electrical design uses winding code BS, so the connected drive can be set with matching motor parameters.