Product Description:

The 2AD180C-B35OR1-BS03-D2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This three-phase unit supplies continuous rotary motion to machine tools, printing lines, and material-handling axes, allowing the controller to maintain speed and torque under varying load demands. Its electromechanical layout supports closed-loop regulation, making it a common prime mover in automated cells that require dependable duty cycles. When paired with a compatible inverter, the motor can support stable speed control during repeated starts, load changes, and long production runs.

Cooling is provided by an axial blower that forces air through the housing so the motor can run at rated load. Position and velocity are returned through high-resolution motor feedback, giving the drive a precise signal for vector control and responsive correction during speed changes. The motor uses flange and foot mounting, so it can be attached to an end plate or fixed to a machine base. Power leads enter a terminal box on the top of the frame, and the conduit exits to the right for consistent cable routing. The motor uses standard bearings, and rotor balance follows vibration grade R. The single-ended design omits a shaft on side B, and motor length code C keeps the overall depth within the expected envelope for this frame.

The motor is supplied without a holding brake, so stopping torque must be supplied by the inverter or an external mechanical lock. It has size code 180, which aligns the stator dimensions with other components used in the 2AD platform. The motor uses winding code BS to match the designated drive current and the electrical characteristics required by the application. At the output interface, it has a balanced key shaft with a shaft seal. This arrangement supports keyed couplings and helps limit contamination at the bearing area during normal operation.