Product Description:

The 2AD180C-B35OR1-BS03-B2V1 induction drive is manufactured by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It supplies continuous rotary power for conveyors, spindle assemblies, and other automated loads that rely on three-phase asynchronous motion. The unit is designed for closed-loop operation with inverter drives, combining forced ventilation and an internal feedback channel to maintain speed stability during extended machine cycles. This arrangement helps the motor respond smoothly when load conditions change during normal production.

Frame size sets the mechanical envelope. The motor uses size code 180, giving it a substantial stator diameter for higher thermal capacity, while length code C indicates the active stack depth used for this version. Cooling air is delivered by an integral axial blower, so output stays consistent even when the housing is surrounded by other hardware. High radial and axial loads are supported by heavy-duty bearings, which helps the motor handle belt tension or gear thrust. Electrical power enters through a top-mounted terminal box, and the cable entry faces rightward to match the stated connection direction.

Functional options tailor the motor to specific axis roles. It is supplied without a holding brake, so static loads must be secured by the drive or by external clamps when the axis is stopped. Position and speed are reported through high-resolution motor feedback, enabling tight velocity control without an external encoder. Installation flexibility is provided by flange and foot mounting, allowing horizontal or vertical anchoring. Balancing to vibration grade R reduces transmitted oscillation at high speeds. The rotor uses a balanced key and does not include a shaft seal. Side B has no shaft end, which shortens the overall length. Winding code BS identifies the stator conductor layout, and the power leads exit on the right-hand side for straightforward cabinet routing.