Product Description:

The 2AD180C-B35OR1-BS03-B2N2 is an AC induction motor manufactured by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It supplies rotary power to automated equipment where constant torque and straightforward speed control are required. Factory-installed standard bearings support radial and axial loads during extended duty cycles, minimizing service interruptions. By pairing three-phase stator windings with squirrel-cage rotor construction, the unit delivers the low-maintenance performance expected in material-handling lines, packaging machines, and general-purpose drive stations.

With a frame size 180, the stator housing matches IEC dimensions for large-frame machinery. The length code C extends the active iron, giving higher continuous output than shorter variants. Installation flexibility is provided by flange and foot mounting, so the motor can be bolted either to a face plate or to base rails. Heat is expelled by an axial blower cooling system mounted at the non-drive end, maintaining winding temperature during prolonged loading. Encoder signals are furnished by high-resolution motor feedback, enabling drive controllers to regulate speed and slip with fine accuracy. For applications that rely on controlled deceleration rather than mechanical locking, the motor ships without a holding brake.

The power feed enters through a terminal box on the top right, matching cabling layouts that route conduits above the motor while keeping the live connection plane to the right side of the frame. Drive torque is transmitted through a balanced shaft with a key that is supplied without a shaft seal, while the opposite end remains open with no secondary shaft extension. Dynamic motion quality is supported by vibration grade S, which limits imbalance to protect coupled loads and adjacent bearings. Additional details, including winding code BS and the right-hand power connection direction, support consistent phasing when multiple 2AD units are installed in parallel.