Product Description:

The 2AD180C-B35OL1-BS03-B2N1 is an AC induction motor manufactured by Bosch Rexroth Indramat and assigned to the 2AD 3-Phase Induction Motors series. Designed as a rotating prime mover, it supplies mechanical power for automated machinery where constant torque and compatibility with digital drives are required. It works with Indramat inverters and supports continuous operation in production cells, machine tools, and material-handling lines. Its construction follows standardized IEC outlines, allowing straightforward integration into existing frames.

Cooling is provided by an internal axial blower, a forced-air system that helps keep the stator temperature within permissible limits during continuous loading. Position and speed are relayed through high-resolution motor feedback, enabling closed-loop regulation with fine velocity control. Installation flexibility comes from flange and foot mounting, so the frame can be bolted either to a base plate or directly to a gearbox housing. The motor uses size code 180 and length code C. Standard bearings support the rotor, and the unit is supplied without a holding brake for axes that use external holding force.

Electrical serviceability is improved by a terminal box that accepts ring-lug connections. The enclosure is oriented to the left when viewed from the drive end and exits at the top of the housing, which simplifies cable routing in vertical cabinets. Dynamic balance is verified to vibration grade R, which helps limit residual motion in spindle applications that require low runout. The shaft is balanced with the full key in place and operates without a shaft seal, while the opposite end is left blank so no secondary coupling is required. Winding code BS indicates the conductor insulation and impedance pattern used with Indramat converters for steady flux generation.