Product Description:

The 2AD180C-B35OB6-BS33-B3N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts electrical energy into continuous rotary motion for tasks such as material transport and metal-cutting spindles in automated cells. Reliable three-phase torque is available under drive control for steady operation in industrial equipment. This motor is intended for applications that require continuous rotation and stable output during regular production duty.

The motor uses a radial blower, so airflow is forced across the stator even at zero shaft speed. When line power is interrupted, motion is held by an electrically released heavy-duty brake that clamps the rotor until supply voltage returns. Accurate speed and position loops are supported by high-resolution motor feedback, which sends precise rotor angle data to the drive controller. Installation is flexible because the frame supports flange and foot mounting, letting the same motor bolt to a base plate or a machine wall. The frame size code 180 indicates the stator diameter and the power range used for this model. Power conductors exit toward side B, and the top-mounted connection point allows cabling to drop directly into overhead trays with fewer bends and less strain.

Electric leads terminate in a terminal box that separates the mains from control wiring and allows gland entries to be selected under local codes. The motor uses vibration grade R, indicating reduced rotor displacement during high-speed operation. The stator uses winding code BS, which matches the drive's voltage and frequency tables. The shaft is a full keyed extension and is balanced with the key installed; it is supplied without a shaft seal, so external protection is required when fluids or dust may reach the coupling area. Length code C sets the axial stack height, and the keyed shaft arrangement supports secure torque transfer to the driven load.