Product Description:

Bosch Rexroth Indramat manufactures the 2AD180C-B35OB6-BS03-D2V1/S022, a member of the 2AD 3-Phase Induction Motors series. This induction unit is used in automated installations that need continuous rotary motion with minimal maintenance. By converting three-phase supply energy into shaft power, it drives pumps, conveyors, presses, and other production hardware that rely on constant speed or inverter-based vector control during sustained industrial operation.

The motor body carries heavy-duty bearings that support the radial and axial loads commonly encountered in industrial duty cycles and repeated start-stop service. Cooling air is forced through an integrated radial blower, allowing the stator windings to remain within thermal limits during prolonged high-current operation. Mechanical installation flexibility is provided by flange and foot mounting, so the housing can bolt to baseplates or machine walls without additional adapters. Power is introduced through a sealed terminal box. The box sits at the top of the frame, and its cable entry faces side B, which helps keep service loops clear of rotating parts. For precise speed feedback, a high-resolution motor encoder is fitted to the rear end shield so the connected drive can monitor rotor position and maintain stable regulation.

The motor is supplied without a holding brake, so external clamping is required when static position retention is needed after power is removed. The frame size is 180 and the length designation is C, which set the overall envelope and cooling channel depth. Dynamic behavior is classified as vibration grade R, which indicates permissible rotor unbalance for smooth running at rated speed. The keyed shaft includes a shaft seal and is balanced with the full key in place, while the opposite side is supplied without a shaft end to suit through-drive arrangements and related coupled-machine layouts. Winding code BS identifies the copper gauge and insulation pattern used with compatible power modules.