Product Description:

Bosch Rexroth Indramat's 2AD180C-B35OB6-BS03-B3V2/S022 belongs to the 2AD 3-Phase Induction Motors series and is supplied as an AC induction motor for general-purpose automation. The unit converts variable-frequency drive power into continuous rotary motion for conveyors, metal-working spindles, and packaging axes where high torque density and service life are required. It is suited for general-purpose automation systems that need steady rotary output during continuous operation.

Cooling air is forced through the frame by a radial blower, so heat is removed even at low shaft speed. Internal thrust and radial loads are carried by heavy-duty bearings, which helps support demanding duty cycles. The motor is built without a holding brake, so external mechanical locking must be used when static load support is required. The frame designation Size code 180 identifies the stator diameter, while length code C indicates a medium magnetic stack that balances torque with overall size. Installation is possible through flange and foot mounting points machined into the housing. Winding code BS sets the coil impedance used with standard Rexroth inverters. The shaft on side B includes an additional shaft end, and the drive shaft is supplied without a shaft seal while remaining dynamically balanced with the entire key to minimize coupling runout. Power leaves the machine through the top-mounted terminal enclosure.

Closed-loop control is supported by the integrated high-resolution motor feedback transducer, enabling precise speed and position data for digital drives. This feedback arrangement helps the drive maintain stable control during speed changes and positioning tasks. Mains conductors enter the motor on side B through a roof-mounted terminal box, a layout that simplifies downward cable drops inside cabinets and keeps clamps clear of coolant spray. Dynamic quality is classified as vibration grade S, which aligns rotor residual unbalance with ISO limits for general-purpose machinery.