Product Description:

The 2AD180C-B35OB6-BS03-A3N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As an induction machine, it converts three-phase electrical energy into mechanical rotation for conveyors, machine tools, and packaging axes that demand continuous torque delivery and straightforward speed control. The cast-iron frame and internal airflow paths allow the unit to be installed in control cabinets or directly on equipment without separate cooling skids.

The motor uses a radial blower to push cooling air across the stator and rotor, allowing rated output to be maintained during long duty cycles. The active diameter labeled 180 mm establishes the magnetic cross-section, while length designation C extends the core for higher power density in the same footprint. Mechanical attachment is identified as flange and foot mounting, which allows either face or base installation. Incoming power lands in a terminal box mounted on the top of the housing, simplifying cable entry from overhead trays and keeping live conductors separated from feedback wiring. Rotor position is relayed to the drive by high-resolution motor feedback, which supports precise vector control at low speed and improves dynamic response during acceleration or load reversal.

The motor is supplied without a holding brake, so applications that need static load support must rely on the drive or an external mechanical lock. A smooth shaft without a seal is provided on side A, which minimizes friction losses but means the driven machine must manage any fluid ingress near the coupling. Dynamic balance meets vibration grade R, keeping oscillation within limits for high-speed spindles. Power conductors exit toward side B through the top-mounted box, and a finished shaft end on side B allows through-drive configurations such as tandem pumps or encoders.