Product Description:

The 2AD180C-B35OB3-BS23-A3N1 is an AC induction motor produced by Bosch Rexroth Indramat as part of the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into controlled mechanical rotation for conveyors, presses, and other motion-centric automation tasks where closed-loop speed regulation is required. Its design is suited to industrial machinery that must maintain steady performance during repeated starts, stops, and load changes. This operating profile is common in machines that rely on consistent motor response over long production runs.

Cooling is supplied by a radial blower, which forces air along the stator housing and helps prevent hot spots during heavy duty cycles. Mechanical attachment flexibility comes from flange and foot mounting, allowing the frame to bolt to a base plate or directly to a machine wall. Power enters through a terminal box on top of the housing, and the conductors are routed to keep cable bends outside the airflow path. An electrically released brake holds the shaft when control power is removed and releases automatically when excitation voltage returns. Position and speed are monitored by high-resolution motor feedback for fine velocity trimming. Standard bearings support the rotor, and the motor uses frame length C for its active iron stack.

The output interface is a smooth shaft without a seal, chosen to minimize friction losses where external sealing rings are unnecessary. A finished shaft end is provided on Side B for couplings or pulleys, which supports direct connection to common driven elements. The motor uses size code 180, so the frame aligns with common IEC mounting hardware. Dynamic behavior is controlled to vibration grade R, which maintains acceptable balance levels for high-speed operation. Electrical characteristics correspond to winding code BS, matching the voltage and current profile used by compatible 2AD drives. With the power terminals oriented upward, cable access remains clear while contaminants stay away from the cooling air stream.