Product Description:

The 2AD180C-B35OB2-BS23-A2V1 is an asynchronous drive unit manufactured by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As an induction motor, it supplies constant torque for feed rolls, spindle drives, and other automated machinery that demand continuous three-phase power conversion. The frame coded 180 establishes a wide stator diameter, and the length code C extends the active core so the machine can deliver the power density required in heavy machining cells.

The rotor spins on heavy-duty bearings that tolerate high radial forces while maintaining alignment at elevated speeds. Stopping torque is applied by an electrically released brake; spring pressure holds the shaft when power is removed and releases automatically when voltage is restored. An integrated axial blower channels cooling air along the housing fins so thermal balance is preserved during continuous duty. Position data are returned through high-resolution motor feedback, allowing the drive controller to apply vector control without incremental encoders. For installation, the housing supports flange and foot mounting, so the same motor can be fastened to a machine base or a gearbox face according to space limitations.

Line conductors enter a terminal box that is mounted on the top of the frame, and those conductors route toward Side B so cable bends are minimized inside tight cabinets. The shaft supplied to the driven side is a smooth shaft without a shaft seal, while the opposite end is intentionally left without a shaft extension to accommodate coupled fan hardware. Dynamic balance follows the ISO R vibration grade, which helps limit oscillation transmitted to precision tooling. Winding code BS identifies the copper fill and insulation pattern used for the required current density, and the stator follows an AC induction scheme that matches three-phase mains.