Product Description:

Bosch Rexroth Indramat's 2AD180C-B35OB2-BS16-C2N1 belongs to the 2AD 3-Phase Induction Motors series and is supplied as an AC induction motor for continuous-duty positioning, conveying, or spindle tasks in automated machinery. The motor is built with standard bearings and a smooth rotor topology, so it can operate over long intervals without frequent service. Because the product combines a compact 180-frame housing with the C length code, it offers a balanced ratio of torque to footprint that suits medium-power axes where cabinet space is limited.

An internal axial blower forces air along the stator to remove heat, allowing the unit to maintain its rated output even when mounted inside confined enclosures. Electrical termination is handled in a terminal box, which provides screw-clamp access for power leads and shielding continuity. Stopping and holding duties are managed by an electrically engaged clamp brake; when power is removed, spring force locks the shaft and prevents motion on vertical or safety-critical axes. Mechanical attachment uses flange and foot mounting, so the motor can bolt directly to a machine frame or sit on a base plate. Position and speed are returned to the drive through digital servo feedback, enabling closed-loop regulation without additional sensors.

The output end uses a smooth shaft with a shaft seal to minimize leakage paths while coupling to pulleys or couplings, and the opposite side is delivered without a shaft end to reduce overall length. Dynamic behavior meets vibration grade R, so the motor can run in precision assemblies without excessive oscillation. The 180 frame code refers to the stator diameter, while winding code BS indicates the conductor gauge and turns per phase used for compatibility with Indramat drives. Power enters from the top of the housing and is routed toward side B, matching cabinets where cable ducts run above the motor.