Product Description:

The 2AD180C-B35OB2-BS03/S002 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. As a three-phase drive, it converts electrical power into controlled rotational torque, making it suitable for feed axes, routing heads, and conveyor sections that require dependable continuous motion in automated machining and handling lines. Its induction design is well suited for machine sections that run for long periods and need stable, repeatable motion under changing process loads.

For temperature control, the motor is equipped with an axial blower that forces cooling air along the stator frame and helps keep winding temperature within safe limits at rated current. Stopping torque is not supplied internally because the unit is delivered without a holding brake, so applications that need static position retention must use an external brake or mechanical lock. Rotor position is relayed to the drive by high-resolution motor feedback, allowing fine speed regulation and accurate vector control during load changes. Mechanical installation is supported by flange and foot mounting, so the housing can be secured either on its end shield or on its base to match the machine structure. Mains conductors terminate in a terminal box mounted on top of the frame, and the outlet direction toward side B helps simplify cable routing inside a cabinet or along a gantry arm.

The motor has a size code of 180 and a length code of C, which indicate the frame diameter and active core length used for this model. This combination gives the motor the thermal mass and torque capacity associated with its housing size. Dynamic balance falls under vibration grade S, which helps reduce transmitted oscillation in machines that depend on smooth rotation and consistent surface quality. The winding code BS identifies the coil arrangement used for this motor, and it corresponds to the voltage, base speed, and current behavior expected by the matching drive controller.