Product Description:

The 2AD180C-B35OB2-BS03-D2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. As a three-phase drive element, it converts electrical energy into continuous rotary motion for conveyors, packaging lines, and other automated stations that demand stable torque under speed control. The design follows the 180 frame designation and the C length variant, producing a power-dense footprint that can fit inside cabinets or mount directly on machine beds without taking excessive installation space.

It expels heat through an internal axial blower, directing airflow along the stator to keep the windings within safe temperature limits during continuous duty. Position and speed are reported by high-resolution motor feedback, enabling the controller to hold precise velocity even at low speeds. Installation is flexible because the housing supports flange and foot mounting, so the motor can bolt to a gearbox or rest on a base plate without adapters. Power conductors terminate in a sealed terminal box located on top of the stator, and they exit the machine on side B to simplify cable routing when space is tight. The shaft includes a seal and is balanced with the full key to limit residual vibration during acceleration.

Inside, the rotor spins on standard bearings that carry radial and axial loads common in belt-driven equipment. Because the unit ships without a holding brake, any static shaft locking must come from the drive or an external brake. Electrical behavior follows the BS winding code, which aligns resistance and thermal limits with matched 2AD drives. Dynamic quality is supported by the motor’s R vibration grade, which limits displacement that could affect couplings and sensors. There is no second shaft end on side B, leaving room for encoders or auxiliary fans.