Product Description:

The 2AD180C-B35OB2-BS03-B2V2 is an AC induction motor produced by Bosch Rexroth Indramat and delivered within the 2AD 3-Phase Induction Motors series. Designed for industrial automation, the unit transforms three-phase electrical power into rotational torque for machine tools, packaging lines, and material handling stages. Its construction follows a standardized form factor that allows direct coupling to gearboxes or belt drives, while application-specific windings and feedback options support use with closed-loop drive controllers on flexible production cells.

The mechanical platform relies on heavy-duty bearings that absorb radial and axial loads generated by cutting or indexing tasks. Continuous thermal control is provided by an axial blower mounted on the housing, and the forced airflow carries heat away from the stator so the frame temperature stays within insulation limits during constant-torque operation. Installation is simplified by flange and foot mounting interfaces, enabling either face or base attachment to the machine bed. Electrical power enters through a terminal box situated on the top of the stator, and the conduit orientation is on Side B so cable runs remain clear of moving parts.

For position and velocity control, the motor integrates high-resolution motor feedback, allowing drive electronics to read fine incremental angle data during high-speed cycles. Dynamic capability results from the laminated core dimension of 180 mm, which helps maintain magnetic flux density without excessive inertia. The assembly conforms to vibration grade S, limiting residual imbalance and permitting smoother motion on precision axes. Its electrical design uses winding identification BS and length code C, which determine the copper fill, resistance, and thermal behavior. The shaft is balanced with the full key, and the motor has no shaft seal, no secondary shaft end, and no holding brake.