Product Description:

The 2AD180C-B35OB2-BS03-B2N1 is an AC induction motor built by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed for use with digital drive controllers, it converts electrical power into mechanical rotation for continuous-duty automation tasks such as metal-cutting spindles, conveyors, and packaging axes. This version uses the longer housing format in its frame class, which supports greater continuous output from the same mounting platform. Its induction design is suitable for applications that require robust rotating performance and stable operation over long production runs.

Thermal management is handled by an axial blower mounted on the end shield, and the forced airflow helps remove heat from the stator during sustained operation. Position feedback is provided by high-resolution motor feedback, allowing the drive to regulate speed and position with fine incremental accuracy. This feedback arrangement supports precise control across a wide operating range and helps the motor respond consistently to changing load conditions. The motor uses frame size 180, which gives it a larger mechanical envelope for higher power applications. Mechanical attachment is arranged for flange and foot mounting, and power conductors terminate in a terminal box that keeps the main connection point separate from signal wiring.

The model is supplied without a holding brake, so any static load retention must be provided by the drive or by external mechanical hardware. Dynamic balance meets grade R, which helps keep vibration at suitable levels for precision machinery and other steady-speed applications. The three-phase supply is routed on side B and leaves the housing through a top cable exit, which can reduce sharp cable bends in crowded installations. There is no shaft extension on side B, while the drive end has no shaft seal and is balanced with a full key. The BS winding code indicates the electrical layout used for this motor, and the standard bearing arrangement supports radial and axial loads commonly seen in belt-driven or directly coupled equipment.