Product Description:

Bosch Rexroth Indramat’s 2AD180C-B35OB2-BS03-A2N3 belongs to the 2AD three-phase induction motors series and is supplied as an AC induction motor for automated machinery that requires constant torque and straightforward speed control. By combining the 180 frame size with a C-length stator, the unit targets mid-range power ratings while remaining compatible with drive controllers used across modular automation platforms. This type of layout suits industrial equipment that runs for long periods under steady load and requires dependable rotary output.

The motor is cooled by an integrated axial blower that directs air along the housing to keep the stator windings within their thermal limits during continuous duty. Position and velocity loops can be tightened because the shaft is equipped with high-resolution motor feedback, allowing the drive to read fine increments of rotor angle. Mechanical attachment is flexible thanks to flange and foot mounting surfaces that let the motor be fixed either to a base plate or directly to a machine wall. The frame size is 180, so the motor follows the bolt patterns and shaft height commonly associated with that range. The unit is supplied without a holding brake, and the rotor has a smooth shaft without a shaft seal, which suits applications that use an external coupling or pulley. Standard-class bearings support the rotating assembly during normal operation.

The three-phase leads enter through a terminal box mounted on the top of the stator, and the cable outlet faces side B so wiring can be routed away from the driven machine. This arrangement simplifies conduit runs in cabinets where multiple motors are stacked vertically. Grade S1 balancing limits oscillation to help protect surrounding assemblies, and the absence of a shaft end on side B permits close-coupled gearbox placement.