Product Description:

The 2AD180C-B35OB2-BS03 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into continuous rotary motion for conveyors, extruders, and gantry axes that require dependable torque in automated production lines. The motor acts as the electromechanical interface between an Indramat inverter and the driven machine element, maintaining consistent speed under closed-loop control. This arrangement lets the drive adjust motor current as load conditions change during production.

Thermal management is provided by an integrated axial blower, which moves air across the housing so the stator temperature stays within permissible limits during continuous duty. Rotor position data are delivered by high-resolution motor feedback, enabling the drive to regulate torque precisely at low and high speeds. That feedback channel also supports accurate speed regulation during low-speed operation and acceleration. The frame designation 180 indicates the housing size, while length code C indicates an extended core that increases continuous power capability. The motor uses flange and foot mounting, which allows either face or base installation when aligning the shaft with gearboxes or belt drives.

The unit is supplied without a holding brake, so static loads must be secured by drive torque or by external clamps when power is removed. Armored supply leads enter a sealed terminal box, which improves cable access and permits ring-lug terminations. The terminal box is mounted on side B of the shaft, and it sits at the top of the frame to keep cables clear of nearby coupling hardware and to suit overhead cable routing. This layout helps separate power connections from the rotating output area during installation. Inside the enclosure, winding code BS corresponds to the stator configuration used for balanced thermal behavior across standard line frequencies.