Product Description:

The 2AD180C-B35OB2-BS01-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. This motor is intended for applications where continuous rotation and high starting torque are required, such as conveyors or pump drives in automated machinery. By converting three-phase electrical energy into mechanical shaft power, it acts as the primary mover in drive trains coordinated by digital converters. It is suited to industrial duty where steady rotation must be maintained under changing load.

Cooling is provided by an axial blower, which forces airflow along the housing to remove heat generated by stator losses during extended duty cycles. The frame follows size code 180, giving a stator diameter that sets the installation footprint and power potential, while the C length code indicates a medium active core length for balanced torque density. Mechanical attachment uses flange and foot mounting, allowing either face mounting or base installation without adapters. Electrical supply conductors enter through a terminal box, and the motor is delivered without a holding brake for systems that use dynamic braking through the drive rather than mechanical locking.

The stator leads emerge on side B, and the box itself is set in a top position, so wiring can be routed downward in vertical cabinets and kept clear of coolant trays. Operating smoothness is classified as vibration grade R, permitting use on precision frames without excessive isolation hardware. Standard bearings support both radial and axial loads, while the drive-end shaft is supplied without a seal and balanced with the complete key to achieve ISO balance quality. The non-drive side has no shaft stub, which keeps the overall depth short for paired gearbox mounts, and winding code BS identifies the copper fill and insulation pattern matched to nominal line frequency and converter voltage.